UF membrane element size
Membrane fiber Specification and Parameters
| Membrane material | Poly vinylidene fluoride(PVDF with Reinforced lining) |
| Membrane Pore size | 0.034-0.1µm |
| Membrane fiber (ID/OD) | 1.0/2.2mm, 0.8/1.9mm,1.0/2.0mm |
| Filter method | Negative pressure suction mode |
| TPM(Max) | 50Kpa |
| Designed Flux | 10-40L/㎡·h |
| PH Range | 2-11 |
| Temperature Range | 5-40℃ |
| MLSS Range | 4000-12000mg/L (min:3000mg/L, max:15000mg/L) |
| Model | MBR6 | MBR10 | MBR15 | MBR-20 | MBR-35 |
| Element size | A*b*D(mm) | 600*760*40 | 630*1000*36 | 630*1500*36 | 630*2000*36 | 844*2198*49 |
| Connection | Ф25 | Ф32 | Ф32 | Ф32 | Ф32 |
| Element parameters | Effective membrane area | 6m² | 10m² | 15m² | 20m² | 35m² |
| Pore size | 0.03~ 0.1µm |
| Material | PVDF( PET lining) |
| Water catchment mode | Both ends of the catchment |
| Filtration mode | Negative pressure suction |
| Operating conditions | TMP | 0.02~0.05Mpa |
| MAX Backwash pressure | 0.1Mpa |
| Water temperature | 10~45℃ |
| Running PH tolerance range | 5~9 |
| Cleaning PH tolerance range | 2~10 |
| Aeration rate(Nm³)/ projected area | 15:1~20:1 |
| Performance | Produced water | Turbidity <0.3NTU SS≈0 SDI<4 |
| Working life | ≥ 5 years under normal usage |
| Model | JHM-MBR-II15 | JHM-MBR-II30 |
| Element size | a*b | 1250mm*1300mm | 1250mm*2000mm |
| Connection | Ф32 | Ф32 |
| Element parameters | Efective membrane area | 15m² | 30m² |
| Pore size | 0.03~ 0.1µm | 0.03~ 0.1µm |
| material | PVDF membrane with PET support tube & ABS cartridge |
| Method of integration | Both ends of the catchment |
| Filtration mode | Negative pressure suction by submersed membrane |
| Operating conditions | Operation pressure range | 0.02~0.05Mpa |
| MAX Backwash pressure | 0.1Mpa |
| Temperature | 10~45℃ |
| Run PH tolerance range | 5~9 |
| Clean PH tolerance range | 2~10 |
| Aeration rate(Nm³)/ projected area | 100-150 m/h |
| Performance | Produced water turbidity | Turbidity <0.3NTU SS≈0 SDI<4 |
| Working life | ≥ 5 years under normal usuage |
| Model | JHM-MBR20-32 |
| Element quanity (piece) | 20m²/pc *32pcs |
| Effective membrane area | 640m² |
| Membrane module bracket dimension | 1690*1420*2380mm |
| Dry/Wet weight(inlc. water&sludge adhering) | 600kgs/900kgs |
Partial OEM model parameters of SINOMEMB ® UF membrane
| UF specifications and models | Membrane material | Operation mode | Membrane element size (mm) | Effective membrane area (㎡) | Nominal filter pore size (μm) |
| SNU-HO-2-SP80 | PVDF | outside-in | Φ225×2360 | 80 | 0.03 |
| SNU-HO-2-HMAX40 | PVDF | outside-in | Φ250×1365 | 52 | 0.03 |
Note: The element model (membrane performance, appearance size) not mentioned can be customized according to the order quantity.
